มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco Aironet 1832 | AIR-AP1832I-S-K9 Aironet 1832i Lightweight Internal Antenna | Special Promotion ซื้อ 2 แถม 1

SKU: AIR-AP1832I-S-K9
Band: Cisco
Type: Wireless Access Point
Model: Aironet 1832
Part Number: AIR-AP1832I-S-K9
Features: Lightweight AP
Detail:

AIR-AP1832I-S-K9 | Aironet 1832i Lightweight Internal Antenna | Special Promotion ซื้อ 2 แถม 1

฿12,000.00 Exclude VAT.

* ฟิลด์ที่จำเป็น

Cisco
รายละเอียดสินค้า
รายละเอียด

Product overview

Ideal for small and medium-sized networks, the Cisco® Aironet® 1830 Series delivers industry-leading wireless performance with support for the latest Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing requirements of wireless networks by delivering a better user experience. The 1830 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.

Features and benefits

With 802.11ac Wave 2, the 1830 Series provides a data rate of up to 867 Mbps on the 5-GHz radio, exceeding the data rates offered by today’s high-end 802.11n access points. It also enables a total aggregate dual-radio data rate of up to 1 Gbps, providing the necessary foundation for enterprise and service provider networks to stay ahead of the performance and bandwidth expectations and needs of their wireless users.

Due to its convenience, wireless access is increasingly the preferred form of network connectivity for corporate users. Along with this shift, there is an expectation that wireless should not slow down users’ day-to-day work, but should enable a high-performance experience while allowing users to move freely. The 1830 Series delivers industry-leading performance for highly secure and reliable wireless connections and provides a robust mobility experience that includes:

●   802.11ac Wave 2 with 3x3 Multiple-Input Multiple-Output (MIMO) technology with two spatial streams when operating in single-user or multiuser MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.

●   Multiuser MIMO (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2 capable clients simultaneously to improve client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as single-user MIMO.

●   Transmit beamforming technology improves downlink performance to mobile devices, including one- and two-spatial-stream devices on 802.11ac, while improving battery life on mobile devices such as smartphones and tablets.

●   Flexible deployment mode through the Mobility Express Solution is ideal for small to medium-sized deployments that require multiple access points. Easy setup allows the 1830 Series to be deployed on networks without a physical controller.

All of these features help ensure the best possible end-user experience on the wireless network.

The Cisco Aironet 1850 Series Access Points also support:

●   The Onyx BLE Beacon Solution, which provides a feature that the Aironet access points are missing: built-in Bluetooth Low Energy (BLE). The Onyx BLE Beacons work smoothly with indoor location-based services. Used for indoor navigation, proximity marketing, and asset tracking, BLE is a tool that is becoming more and more useful with each passing day. With the Onyx BLE Beacons, customers can add BLE to their networks.

Product specifications

Feature

Specifications

Software

Cisco Unified Wireless Network Software Release with AireOS wireless controllers:

●  8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points

Deployment modes

Centralized, standalone, sniffer**, Cisco FlexConnect, monitor**, OfficeExtend**, mesh**

Supported wireless LAN controllers

●  Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller,** Cisco Catalyst 3650 and 3850 Series Switches with integrated controller**
●  Cisco Mobility Express

802.11n version 2.0 (and related) capabilities

●  3x3 MIMO with two spatial streams
●  Maximal Ratio Combining (MRC)
●  20- and 40-MHz channels
●  PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
●  802.11 Dynamic Frequency Selection (DFS)
●  Cyclic Shift Diversity (CSD) support

802.11ac Wave 1 and 2 capabilities

●  3x3 MIMO with two spatial streams, single-user or multiuser MIMO
●  MRC
●  802.11ac beamforming (transmit beamforming)
●  20-, 40-, and 80-MHz channels
●  PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
●  802.11 DFS
●  CSD support

Maximum number of nonoverlapping channels

2.4 GHz

●  802.11b/g:
◦   20 MHz: 3
●  802.11n:
◦   20 MHz: 3
◦   40 MHz: 1 (hardware capable)

5 GHz

●  802.11a:
◦   20 MHz: 25
●  802.11n:
◦   20 MHz: 25
◦   40 MHz: 12
●  802.11ac:
◦   20 MHz: 21
◦   40 MHz: 12
◦   80 MHz: 6

Maximum transmit power

2.4 GHz

●  802.11b
◦   22 dBm, 3 antennas
●  802.11g
◦   22 dBm, 3 antennas
●  802.11n (HT20)
◦   22 dBm, 3 antennas

5 GHz

●  802.11a
◦   23 dBm, 3 antennas
●  802.11n (HT20)
◦   23 dBm, 3 antennas
●  802.11n (HT40)
◦   23 dBm, 3 antennas
●  802.11ac
◦   non-HT80: 23 dBm, 3 antennas
◦   VHT20 23 dBm, 3 antennas
◦   VHT40: 23 dBm, 3 antennas
◦   VHT80: 23 dBm, 3 antennas

Available transmit power settings

2.4 GHz

●  22 dBm
●  19 dBm
●  16 dBm
●  13 dBm
●  10 dBm
●  7 dBm
●  4 dBm
●  1 dBm

5 GHz

●  23 dBm
●  20 dBm
●  17 dBm
●  14 dBm
●  11 dBm
●  8 dBm
●  5 dBm
●  2 dBm

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Integrated antenna

●  2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
●  5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°

Interfaces

●  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
●  Management console port (RJ-45)
●  USB 2.0 (enabled via future software)

Indicators

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions
(W x L x H)

●  Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)

Weight

●  2.05 lb (930 grams) 

Environmental

Cisco Aironet 1830i

●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
●  Operating temperature: 32° to 104°F (0° to 40°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.

System memory

●  1 GB DRAM
●  256 MB flash

Input power requirements

●  AP1830: 44 to 57 VDC
●  Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz

Power draw

●  15.4W

Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.

Powering options

●  802.3af/802.3at
●  Enhanced PoE
●  Cisco local power supply, AIR-PWR-C=
●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only), AIR-PWRINJ6=

Note: If 802.3af PoE is the source of power, the USB port is disabled.

Warranty

Limited lifetime hardware warranty

Compliance standards

◦   UL 60950-1
◦   CAN/CSA-C22.2 No. 60950-1
◦   UL 2043
◦   IEC 60950-1
◦   EN 60950-1
●  Radio approvals:
◦   FCC Part 15.247, 15.407 **
◦   RSS-210 (Canada)
◦   EN 300.328, EN 301.893 (Europe)
◦   ARIB-STD 66 (Japan)
◦   ARIB-STD T71 (Japan)
◦   EMI and susceptibility (Class B)
◦   FCC Part 15.107 and 15.109 **
◦   ICES-003 (Canada)
◦   VCCI (Japan)
◦   EN 301.489-1 and -17 (Europe)
●  IEEE standards:
◦   IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦   IEEE 802.11ac Draft 5
●  Security:
◦   802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦   802.1X
◦   Advanced Encryption Standard (AES)
●  Extensible Authentication Protocol (EAP) types:
◦   EAP-Transport Layer Security (TLS)
◦   EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦   Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦   EAP-Flexible Authentication via Secure Tunneling (FAST)
◦   PEAP v1 or EAP-Generic Token Card (GTC)
◦   EAP-Subscriber Identity Module (SIM)
●  Multimedia:
◦   Wi-Fi Multimedia (WMM)
●  Other:
◦   FCC Bulletin OET-65C
◦   RSS-102
ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท Wireless Access Point
Model Aironet 1832
License / Features Lightweight AP
รีวิวสินค้า
รีวิวของลูกค้า (2)
สั่งของไว บริการเยี่ยม
บริการ
ราคา
สั่งของไว บริการเยี่ยม Review by ไอทีซัพพอร์ต (โพสต์เมื่อ 27/3/2019)
ใช้งานอุปกรณ์ดี บริการเร็ว
บริการ
ราคา
ใช้งานอุปกรณ์ดี บริการเร็ว Review by ส่วนงานสารสนเทศ (โพสต์เมื่อ 26/3/2019)
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco Aironet 1832 | AIR-AP1832I-S-K9 Aironet 1832i Lightweight Internal Antenna | Special Promotion ซื้อ 2 แถม 1
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา